Shower leaks while running
Water appears at the head, hose, controls, enclosure, tray edge or a nearby surface only while the shower is used.
Shower repair Guildford
Leaks · flow · controls · trays · screens
Shower repair in Guildford for leaks, trays and screens
Request shower repair for a visible plumbing fault, unreliable flow or temperature, a leaking enclosure or a tray problem. The page separates shower plumbing from drain blockages, electrical faults, hot-water issues and specialist glass or surface work.
24/7emergency contact available
£0call-out fee
Clearquote before work begins
12-monthworkmanship guarantee; terms apply
Start with the symptom
What is happening when the shower is used?
The same visible water can come from a fitting, seal, tray, waste or concealed route. Describe the pattern rather than guessing the cause.
Flow or pressure has changed
The shower feels weaker, pulses or differs from other outlets. The wider water supply must not be assumed to be a shower-only fault.
Temperature is unreliable
The shower runs too hot, cold or changes unexpectedly. Stop using it if there is a scalding risk and describe whether other hot-water outlets are affected.
Mixer or control is difficult
A handle, cartridge, valve or control is stiff, dripping or not responding consistently and the unit details need checking.
Water collects in the tray
Slow drainage, standing water or an overflow symptom may belong to the blocked-drain route rather than the shower mechanism.
Screen or tray looks damaged
A worn seal, loose frame, movement, chip or crack needs a safety and scope check before repair, replacement or specialist work is proposed.
Choose the service route
Shower repair, screen repair, tray repair or drain help?
Each route has a different practical boundary. Keeping them together on one canonical page consolidates the shower-repair intent without promising that every trade is included.
01Visible fitting
Shower plumbing repair
For an accessible head, hose, outlet, mixer, valve, seal or water connection that is leaking or not operating as expected.
Review plumbing scope02Enclosure edgeShower screen repair
For leaking seals, loose frames, alignment or door hardware. Damaged safety glass may require replacement or a glazing specialist.
Review screen scope03Base or surfaceShower tray repair
For water at the tray edge, movement, a damaged surface or a suspected seal or waste issue. Surface restoration is not assumed.
Review tray scope04Waste will not clearBlocked shower drain
For standing water, slow drainage, gurgling or a recurring waste blockage rather than a shower control or enclosure fault.
View blocked-drain helpShower screens and trays
Separate seals and fittings from glass and surface damage
The two old service pages are consolidated here, but repairability still depends on the material, movement, safety and cause of the water escape.
Shower screen repair
Seal, frame, hinge and alignment checks
Leaking seals, loose fixings, movement, misalignment and door hardware can be described here. Cracked, chipped or shattered safety glass is a separate safety and replacement decision and may require a glazing specialist.
- Show where water leaves the enclosure
- Photograph seals, fixings, hinges and door alignment
- Keep people away from damaged glass
Shower tray repair
Surface, seal, movement, waste and surrounding finishes
Water at the base does not automatically mean a cracked tray. The perimeter seal, movement, waste connection, enclosure, adjacent tiles and the tray surface may need to be separated before repair or replacement is considered.
- Record whether the tray moves under load
- Show cracks, chips, gaps and nearby staining
- Confirm whether specialist surface restoration is available
How it works
From the shower symptom to an agreed repair scope
Photos can make the first conversation clearer, but they do not confirm the cause, parts, specialist availability or whether opening finished surfaces is needed.
Show where and when it happens
Share clear photos, the Guildford postcode, whether the symptom starts during or after use and the point where water, flow or temperature changes.
Identify the shower and the correct route
The shower type, make or model, hot-water source, drainage symptom and any glass or electrical risk help separate plumbing, drainage, heating and specialist work.
Confirm access and service boundaries
Visible fittings, isolation, panels, seals, screen fixings, tray movement and connected finishes are considered before the proposed work is defined.
Agree the quote, complete and check
The repair scope and exclusions are agreed before work begins. Completed work is checked against the authorised task and relevant aftercare is explained.
Service boundaries
When the fault belongs to another service
A clear route prevents a shower page from competing with drainage, leak-detection, heating, electrical and installation pages.
Standing water or slow waste
Use blocked drains in Guildford when the main symptom is slow drainage, gurgling or backup.
Source is concealed or uncertain
Use leak detection when moisture appears away from the visible shower fittings and the source cannot be confirmed.
Electric shower work
Electrical faults and a planned replacement need separate confirmation. See electric shower installation and do not open or test unsafe electrical equipment.
Hot water or pressure elsewhere
If several outlets are affected, the shower may not be the source. Use the heating and hot-water route or the relevant plumbing parent page.
Not automatically included:Specialist glass replacement, tray resurfacing, opening or reinstating tiles and walls, drying or mould treatment, electrical repair, wider bathroom renovation and concealed leak detection must each be confirmed separately.
Pricing and standards
What affects a shower repair quote?
No fixed price is shown because the shower type, fault, access, compatible parts, screen or tray condition and related specialist work vary.
Shower type and symptom
A mixer, pumped, digital or electric shower can require a different plumbing, product or trade route. The type must be confirmed first.
Parts and access
Make, model, isolation, accessible panels, compatible components and finished surfaces influence the proposed repair scope.
Screen, tray and finishes
Seals and fittings differ from damaged glass, structural movement, resurfacing, waterproofing, tiling or making good.
Confirmed commercial terms
No call-out fee. You pay for agreed labour and materials after receiving a clear quote before work begins. Cash, credit card and debit card accepted. Relevant completed work is covered by a 12-month workmanship guarantee, subject to the agreed scope and written terms.
Before you contact us
Prepare the details that help route the shower repair
These details reduce ambiguity without turning photos or an online form into a diagnosis.
Show the full shower and the affected area
Include the controls, head or hose, screen edge, tray, waste and any visible water or staining. Keep a safe distance from damaged glass or electrics.
Explain when the symptom starts
Say whether it happens immediately, only while water is running, after the shower stops, during drainage or at other outlets too.
Share the make, model and recent work
Include any label or instructions that can be photographed, previous repair attempts and recent changes to the shower, bathroom or hot-water system.
Need a wider plumbing route?
Return to plumbing repairs in Guildford, review water leak repair, or read the guide to common plumbing problems at home.
Need shower repair in Guildford?
Describe the shower type, where the problem appears, whether flow or temperature is affected, any screen or tray damage, the Guildford postcode and any immediate safety risk.